| CTP?L1 | Guard locking actuated by spring force applied and power-ON released (closed-circuit current principle) |
| Plug connector (view of connection side) | Pin | Designation | Function | Conductor coloring of connecting cable |
|---|---|---|---|---|
| X 1.1 | FI1B | Enable input for channel 2 | WH | |
| X 1.2 | UB | Operating voltage of AR electronics 24 V DC | BN | |
| X 1.3 | FO1A | Safety output, channel 1 | GN | |
| X 1.4 | FO1B | Safety output, channel 2 | YE | |
| X 1.5 | OL | Guard locking monitoring output | GY | |
| X 1.6 | FI1A | Enable input for channel 1 | PK | |
| X 1.7 | 0 V UB | Operating voltage of AR electronics 0 V | BU | |
| X 1.8 | RST | Reset input | RD | |
| X 2.1 | IMM | Operating voltage of guard locking solenoid 0 V | BN | |
| X 2.2 | OD | Door monitoring output | WH | |
| X 2.3 | OI | Diagnostic output | BU | |
| X 2.4 | IMP | Operating voltage of guard locking solenoid 24 V DC | BK | |
| X 2.5 | - | n.c. | GY |
| Housing material | |
| Switch head cover | Die-cast zinc |
| Safety switch housing | Fiber glass reinforced thermoplastic |
| Weight | |
| Net | 0,42 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... +55 °C |
| Degree of protection | IP67 / IP69 / IP69K |
| Resilience to vibration | In acc. with EN IEC 60947-5-3 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Ready delay | 8 s |
| Switching frequency | max.0,5 Hz |
| Connection | 2 plug connectors M12, 5 and 8-pin |
| Approach speed | 20 m/min |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 3900 N |
| Locking force FZh | 3000 N |
| Retention force | 20 N |
| Extraction force | 20 N |
| Actuating force | 10 N |
| Overtravel | 5 mm |
| Test-pulse interval | min.140 ms |
| Test pulses | max.1,0 ms |
| Operating voltage DC | |
| UUB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Current consumption | |
| IUB | 40 mA |
| IIMP | 400 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 150mA |
| Solenoid operating voltage DC | |
| UIMP | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (operating voltage UB) | 0,25 ... 2 A |
| External (solenoid operating voltage IMP) | 0,5 ... 8 A |
| Rated insulation voltage Ui | max.50 V |
| Rated impulse withstand voltage Uimp | max.0,5 kV |
| Power consumption | 6 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety class | |
| EN IEC 61140 | III |
| Risk time according to EN 60947-5-3 | |
| Delay per device | 5 ms |
| Single device | max.260 ms |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Monitoring output OD | |
| Type of output | p-switching, short circuit-proof |
| Switching current | 1 ... 50 mA |
| Output voltage | 0,8xUB ... UB V DC |
| Monitoring output OI | |
| Type of output | p-switching, short circuit-proof |
| Switching current | 1 ... 50 mA |
| Output voltage | 0,8xUB ... UB V DC |
| Safety outputs FO1A / FO1B | |
| Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
| Switching current | |
| Per safety output FO1A / FO1B | 1 ... 150 mA |
| Output voltage | |
| High U(FO1A) / U(FO1B) | UB-1,5 ... UB V DC |
| Low U(FO1A) / U(FO1B) | 0 ... 1 V DC |
| Off-state current Ir | max.0,25 mA |
| Switch-on time | max.400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms In acc. with EN IEC 60947-5-3 |
| Monitoring output OL | |
| Type of output | p-switching, short circuit-proof |
| Switching current | 1 ... 50 mA |
| Output voltage | 0,8xUB ... UB V DC |
| Repeat accuracy R | 10 % |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
| Performance Level | PL e |
| Category | 4 |
| PFHD | 4.1 x 10 -9 |
| Mission time | 20 y |
At Euchner we are proud of our wide range of industrial parts and equipment. They have been designed to meet the most diverse needs of our customers. Thanks to our representation resseller FAMAGA in India our Euchner we are your reliable partner.
We provide a large selection of top-notch industrial parts, gear, and apparatus. We promise that you will find a great solution to your difficulties, no matter what field you operate in—manufacturing, construction, or anything else.
Our dedication to quality is demonstrated by our Euchner catalogue. We provide a wide range of high-quality industrial components suitable for different applications. Whether you work in manufacturing, construction, or any other industry, our broad selection of products ensures that you will find the perfect solution for your particular needs.
At Euchner, we are dedicated to assisting you in selecting the right industrial parts and equipment. Our team of specialists can offer insightful advice to ensure that your selection precisely meets your needs. They are knowledgeable about the Euchner range of products that we offer. We are here to ensure a simple and easy shopping transaction for you.
As a Euchner reseller, we understand the value of both quality and efficiency. We source our products from the most reputable manufacturers and maintain a Euchner warehouse with ready-to-ship stock to expedite your order processing. Our webshop is designed with your convenience in mind, offering a seamless shopping experience.
When it comes to industrial parts and equipment, FAMAGA India is your good choice. Browse our catalogue, make selections with confidence, and experience top-notch customer service from the moment you visit our webshop. Welcome to a world of quality and reliability, welcome to FAMAGA India.
